PRO - ACTION SUSPENSION & MOTORS by FEINE TUNE MOTORSPORTS

Suspension

Pro-Action takes mass-produced motorcycles and builds them to the specific needs of the owner. We start by selecting the correct spring rates to uphold the weight of the motorcycle and rider. We then determine the correct Pro-Action Valve Bodies to be used to match up with the valving systems to be installed. Pro-Action uses many categories of shock and fork valving: Motocross, Supercross,Freestyle, Desert, Supermoto, and Off-Road. Once one of these categories is chosen, Pro-Action then designs a system that specifically fits the individual for height, weight, type of riding, class of competition, normal finishing position, and years of experience. Ground conditions and terrain are also considered.
*Note: A "works" bike is nothing but a pre-production test bike specifically set up for the factory rider that is using it.

Shocks

Enter The Third Dimension - Three Stage Incremental Valving

Pro-Action has always been the pioneer of multi stage valving. When the world had single-stage, we had two-stage. When the world went to two-stage, Pro-Action went to three-stage. After years of research and development with three-stage valving, we evolved it into our exclusive incremental system. The Pro-Action three-stage, incrementally pressure-sensitive, self-adjusting valving system not only has a mid-range circuit that does not exist in any stock shock, but also has increments of valving within each stage. The result is a valve or combined group of valves that compensate for any pressure that can be exerted by the speed of the shaft due to the striking of a bump without a trace of valve collision or mid-stroke harshness. Link this compression circuitry with our exclusive catch valve rebound damping and you have truly entered into the third dimension of shock absorber technology.

Forks

Pro-Action's World Famous Valve Body System

Pro-Action has been the innovator of front fork valve body design technology. Our pistons match flow dynamics of the fork with critical edge of hydraulic lock valve body designs. We now produce 12 types of valve bodies. These valve bodies have the most direct flow patterns of all valve bodies produced. This direct flow design eliminates harshness in the fork and reduces rider fatigue. The edge of hydraulic lock design eliminates bottoming. Super Cross Valving uses a two-stage system. Motocross valving uses a two-stage system with a quick opening circuit for choppy acceleration bumps. The off-road valving uses a three-stage system to eliminate deflection off rocks and roots and provides excellent mid-range manners and great resistance to bottoming. The result is the finest working front fork system ever built. Imagine a front fork that stands up tall, is plush on initial hits, firm on big hits, and progressively soaks up everything in between.

Prices